Connecting A Projector - Sony VAIO VGN-UX100 Series User Manual

Connecting a Projector

You need the supplied port replicator or display/LAN adapter to connect a projector (for example, the Sony LCD projector) to
your computer.
To connect a projector
1 Connect the power cord (1) of the projector into an AC outlet.
Plug the RGB signal cable (2) into the monitor (VGA) port (3) a on the port replicator or on the display/LAN adapter.
2
3 Plug the audio cable (4) (not supplied) into the headphones jack (5) i.
4 Plug the RGB signal cable and the audio cable into the jack and port on the projector (6).
n 76 N
Using Peripheral Devices