Sony VAIO VGN-T300 Series Connection Manual page 25

Answers to Frequently Asked Questions
Cingular Connection Manager (CMM)
Question: What does it mean to "Restore" from the tool help bubble?
Answer: Clicking the "mini bar" option once, reduces the full details to a
"mini bar". Click the "Restore" option to return to full details view.
Question: Why does the "Connection Log" not sort when clicking on the
columns title bar?
Answer: This feature will be available in future versions. Sorting by type,
technology, date/time, duration total bytes and description should be
available in future versions.
Question: Why do I see "Device not detected" in the Cingular Connection
Manager details window?
Answer: This is most likely to occur while switching from WWAN to
launching CCM. There is a slight timing degradation that occurs while
making the switch which causes this status. Turn off the WWAN and then
reconnect the WWAN to fix the problem.
Question: CCM sometimes fails to respond after resuming from Suspend
mode. What could be the problem?
Answer: If the "General" tab under the Edit Profile screen for GSM is left
open, this can often keep CCM from reopening upon resuming from suspend
mode. Make certain the "Edit Profile" screen has been closed after making
any changes. A reboot should correct the problem.
Question: When I try to connect through Cingular GPRS network, the
Connect/Disconnect button is greyed out, and there is no connection
available.
Answer: Click on the "Connect Using "tab in CCM, and check one of the
connection types from the drop down menu. Close out of CCM and reboot.
Question: I noticed an option to create a CSD Accelerated/Non-Accelerated
network profile. What is this?
Answer: CSD is Circuit Data Network. This is an older technology with
lower throughput which has been phased out. We recommend that
EDGE/GPRS Acelerated/NonAcelerated profile options be used instead.
25