Help Guide | Setting Up The Speaker Add Function - Sony LSPX-S1 Help Manual

Help Guide
Glass Sound Speaker
LSPX-S1
Setting up the Speaker Add function
Two LSPX-S1 speakers can play in stereo (stereo mode) or can play the same sound (double mode).
Turn on two speakers and bring them within 1 m (3 ft) of each other. Then press and hold the ADD
1
(Speaker Add function) button for at least two seconds on each.
A sound will indicate that the Speaker Add function has been activated, and the BLUETOOTH indicator will flash quickly in
orange.
Briefly press the ADD (Speaker Add function) button on one of the speakers.
2
The speaker that you operate will release a sound to indicate that it has been set as the "master unit" (left (L) channel), and
the BLUETOOTH indicator will flash slowly in orange.
Another sound will indicate when the Speaker Add function is completely set up.
Pair your BLUETOOTH device with the master unit.
3
If pairing has already been performed, then just connect.
Start playback on the BLUETOOTH device.
4
Playback starts in stereo mode. If necessary, switch the mode.
26