Naish Fusion 5-Line Manual page 21

VII - SAFETY LEASH
1) ATTACHING THE SAFETY LEASH - Continued
Step 5: Pull the Quick Release handle over the arm
to secure it into position as shown.
VII - SAFETY LEASH
2) OPERATING THE SAFETY LEASH QUICK RELEASE
WARNING: To completely free yourself from the kite in an emergency situation;
A) First activate the Smart Loop Quick Release.
B) Then activate the Safety Leash Quick Release.
WARNING: Only activate the Safety Leash Quick Release in a serious
emergency situation. Once you activate the Safety Leash Quick Release, you
will have no control over your kite and it may become an extreme hazard for
everyone downwind from you both on land and water. When you activate the
Safety Leash Quick Release, always remember there is a strong possibility that
you may not be able to retrieve your kite. Therefore, there is a high likelihood that
you will be required to swim, or need assistance to get back to shore.
22
NAISHKITES.COM
WARNING: Check to make sure the Safety Leash
handle is securely in position before launching
your kite.
To activate the Safety Leash Quick Release:
Step 1: Grab the Quick Release handle and push it
away from your body as shown.
Step 2: Immediately let go of the Quick Release
handle so you are completely free from the kite.