Naish Fusion 5-Line Manual page 12

IV - Assembly
2) ATTACHING FLYING LINES TO A 5-LINE KITE
A) Begin with the flying lines from the 5-line control
system laid out directly upwind of the kite.
WARNING: Make sure all flying lines are straight,
completely free of tangles and properly positioned
for correct line connection before attaching them
to the kite.
B) Attach the 5th flying line to the 5th line
connection point.
C) Attach both front flying lines to the front line
connection points.
D) Attach the left steering (rear) flying line to the left
steering (rear) line connection point.
E) Attach the right steering (rear) flying line to the right
steering (rear) line connection point.
WARNING: Naish flying lines and bridles feature foolproof connectors to reduce the risk of incorrect connection
between front and steering (rear) line connection points. Be sure to always use authentic Naish flying lines and
bridles when using Naish kites and control systems.
ATTACHING FOOLPROOF CONNECTORS
A) To create a Lark's head loop,
fold the loop over and pull the line
through the loop as shown.
Steering
Front
(Rear)
B) Insert the knotted end of the
other line through the Lark's
head loop as shown.
Steering
5th Line (Rear)
C) Pull the lines tight to secure
the connection as shown.
NAISHKITES.COM
Front
13