Sony VAIO VGN-A600 Series Quick Start Manual page 44

VAIO® Computer Quick Start
4 Press the Right Arrow key
Down Arrow key
factory default values. appears.
5 Press the Enter key. The Load Optimal Defaults? window appears.
6 Select Ok, and press Enter.
7 Select Exit (Save Changes), and press Enter. The Save configuration
changes and exit setup? window appears.
8 Select Ok, and press Enter. The computer restarts.
✍
If this occurs on a regular basis, contact Sony Computing Support
(http://www.sony.com/pcsupport).
What do I do if the message "Operating system not found"
appears when my computer starts, and why won't Windows
start?
❑
Make sure the computer does not have a "non-bootable" floppy disk in the
floppy disk drive (if applicable).
❑
If a non-bootable floppy disk is in the drive:
1 Remove the floppy disk.
2 Restart the computer and confirm that the Microsoft® Windows®
operating system starts properly.
❑
If the Windows operating system still does not start, follow these steps to
initialize the BIOS:
1 If there is a disk in the floppy disk drive, then remove it.
2 Turn off the computer.
3 Remove any peripheral devices connected to the computer.
4 Restart the computer.
5 Press the F2 key when the VAIO logo appears. The BIOS Setup
window appears.
6 Press the Right Arrow key
7 Press the Down Arrow key
message Load factory default values. appears.
44
to select the Exit tab, and then press the
to select Get Default Values. The message Load
to select the Exit menu.
to select Get Default Values. The