How To Use This Guide; How To Put It Together - Bissell ProHeat 7950 SERIES User Manual

How to Use This Guide

This User's Guide has been designed to help you get the utmost
satisfaction from your BISSELL ProHeat deep cleaner. You'll find
assembly and operating instructions, safety precautions, as well as
maintenance and troubleshooting instructions. Please read this Guide
thoroughly before assembling your deep cleaner.
Pay particular attention to the product diagram, assembly
instructions, and part names. Locate and organize all parts before
assembly. Familiarize yourself with the parts and where they
go. Following this User's Guide will greatly enhance your ability
to get the most performance from your BISSELL ProHeat for
many years.
Your ProHeat comes in 3, easy to assemble
components plus accessories.
Upper Handle
Lower Handle
Tool Caddy
The only tool you will need to assemble your cleaner is a Phillips
head screwdriver.

How to Put It Together

Refer to Assembly Diagram on page 4
Make sure the Powerdrive Knob is in the "ON" position.
1.
Slide Upper Handle onto Lower Handle.
Insert 2 screws into lower holes while gently pushing
2.
down on Upper Handle. See drawing for exact location.
Tighten screws completely.
Position Tool Caddy on back of unit. Insert 4 screws until
3.
snug.
Snap tools into storage on the Tool Caddy as shown in
4.
figure 4.
ProHeat assembly is now complete.
WARNING:
Do Not plug in your cleaner
until you have completely
assembled it per the following
instructions and are familiar
with all instructions and
operating procedures.
1
Powerdrive Knob
1
Tighten
2
Completely
3
4
5