Ricoh Pro L5130 Rip Settings Manual page 26
Hide thumbs
Also See for Pro L5130:
- Safety information manual (32 pages) ,
- Quick start quide (32 pages) ,
- Manual (12 pages)
Table of Contents
Advertisement
2. Functions for L5130/L5160
Normally, you do not need to change this setting. Only if this setting differs from the machine setting,
adjust it to match the machine setting.
Checking the machine setting
1.
Connect to the printer with the web browser and log in in administrator mode.
For details, see "Using Web Image Monitor", Operating Instructions.
2.
Open "SNMP Settings" in "SNMP".
3.
Make a note of the SNMP community name.
Checking/specifying the RIPCenter/PosterShop community name
1.
Select the printer, and then click [Configure Printer].
2.
After the confirmation dialog box appears, click [Yes].
3.
Click the [Device] tab.
24
DWU814
Advertisement
Table of Contents
