AirSense Stratos Quadra Manual

Four area

Enlarged version

AirSense Technology Limited

71 Knowl Piece • Wilbury Way • Hitchin • Hertfordshire SG4 0TY • UK

Tel: (+44) (0)1462 440666 • Fax: (+44) (0)1462 440888

e-mail: sales@airsense.co.uk

www.airsense.co.uk./airsense

AirSense Technology Benelux BV

Graaf Florisweg 52, 2805 AM Gouda • Nederland

Tel: (+31) 1825 17078 • Fax: (+31) 1825 18771

e-mail: schakel@cistron.nl

AirSense Technology (Aust) Pty Ltd

122 Ashley Street • Underdale • S.A. 5032

P.O. Box 302 • Torrensville Plaza • S.A. 5031

Tel: (08) 8234 2525 • Fax: (08) 8443 9625

e-mail: airsense@tne.net.au

In line with continuous product improvement we reserve the right

to modify or update specifications without notice.

Your Protected Areas are:

Area 1 Protects:

Area 2 Protects:

Area 3 Protects:

Area 4 Protects:

Your Fire Officer is:

Your Area/location is:

Your Emergency/assembly area is:

Iss. 29-11-02

This guide outlines basic detector displays and

gives a brief indication of what to do when

the lamps illuminate.

This is not a full technical or installers manual.

Equipment may vary according to specification.

If there is any doubt please contact your supplier.

Table of Contents

Need help?

Do you have a question about the Stratos Quadra and is the answer not in the manual?

Page 1 Graaf Florisweg 52, 2805 AM Gouda • Nederland Tel: (+31) 1825 17078 • Fax: (+31) 1825 18771 e-mail: schakel@cistron.nl AirSense Technology (Aust) Pty Ltd 122 Ashley Street • Underdale • S.A. 5032 P.O. Box 302 • Torrensville Plaza • S.A. 5031 Tel: (08) 8234 2525 •...
Page 2 What to do if... What do the lights mean? Alarm Levels (Red) Top line (Green) Below (Yellow) Detection areas Bar Graph (Yellow) (Yellow) These indicators are unique to Stratos-Quadra. The purpose of these displays is to permit the display of four separate detection sectors with a single display panel.
Page 3 Controls & Indicators Alarm Levels (Red) Operational Indicators Detection areas Push (Yellow) Buttons SMOKE DENSITY Display Meaning This ten segment bargraph shows the current smoke density sensed by the system. This bargraph also displays other information during the TEST routine (see below) and it gives a 'rolling' single segment display during the fifteen minute duration Fastlearn™...
Page 4 What to do if... What to do if... The red AUX lamp is illuminated The red PRE-ALARM lamp is illuminated This alarm level can be programmed to operate between bargraph levels 4 The AUX alarm may be programmed to operate between bargraph level 2 to 10.