Waveshare 6inch e-Paper HAT User Manual page 8

6inch e-Paper HAT User Manual
2. Set the DIP switch to SPI mode
3. Install BCM2835 libraries to your Raspberry Pi, you can download the newest
bcm2835 library from its official website
http://www.airspayce.com/mikem/bcm2835/
Copy the library you download to Raspberry Pi and install it with commands
below. You can also following the instruction on its website above
1. tar zxvf bcm2835-1.xx.tar.gz
2. cd bcm2835-1.xx
3. ./configure
4. make
5. sudo make check
6. sudo make install
4. Download the demo codes
1. git clone
2. cd IT8951
3. make
4. sudo ./IT8951
This demo code supports display general BMP pictures directly, if you find that
your BMP picture cannot be displayed, please open it on Windows PC with Paint
software (Windows APP), save as BMP and try again.
https://github.com/waveshare/IT8951.git
0 0 01.bmp
8 / 19