6inch e-Paper HAT User Manual
D/C
CSEL
HRD
RST
BUSY
2. Set the switch to I80 mode
3. Download the demo code from wiki
Open project and change set the interface to I80. Modify the interface definition,
compile and download it to STM32 board
4. After downloading, e-Paper is refreshing image and corresponding information
are printed to serial port:
Data/Command (Low for
PC7
PC6
PC3
Read enable (Low for active)
PC0
PA7
Busy state output (Low for busy)
command)
Chip select (Low active)
Reset (Low for reset)
12 / 19