Digiality IR-200 Owner's Manual page 6

Installation & Operation Guide
Receiver
Picture 1
Working with extender probe
Power
Adaptor
(Using IR )
Make sure the IR probe is pointing toward
IR sensor receiving Window with proper position
(about within 1M and working angles
Picture 3
Working without
extender probe
Working Angle not more
than +/- 15°
+/-
15°).
Picture 4
Working without
extender probe
Side View
0.4
Not less than 0.4M and no more than M
Working Angle not more than
Picture 2
Antenna
Keep Vertical
7.6M
8M
+/- 15°
8