Bluetooth Mode - LENCO DAR-040 User Manual

FM mode
Information cycling through: Radio text, programme type (PTY), frequency, Mono/Stereo, time and date.

Bluetooth mode

Information cycling through: Time and date.
Using the Menu control
It let you to configure some system option or this product. To change the menu setting, under DAB or FM mode, press and hold
"Info/menu" button until entered to menu mode, use "Station(-)/(+)" and "Enter" to choose and confirm your selection
correspondingly.
 *Full scan - it will scan available DAB stations.
 *Manual tune - manually select a particular channel/frequency for DAB station.
 *DRC - This function reduces the difference between the loudest and quietest audio being broadcast.
DRC options: off (default)/high/low
Note: DRC only works if it is enabled by the broadcaster for a specific station.
 *Prune - This removes all invalid stations indicated in the station list with a '?' in front of the station name.
 ^Scan setting - select the method of scans and stop at FM mode.
Scan options: Strong stations (default)/All stations
 ^Audio setting - By default, all stereo stations are reproduced in stereo.
Audio options: Stereo allowed (default)/Forced mono)
Remarks: * DAB mode only, ^ FM mode only
Using the System menu
You can set different functions in System menu. Under DAB or FM mode, press and hold "Info/menu" and select "System", then press
"Enter" to login to. Use "Station (-)/(+)" and "Enter" to choose and confirm your selection correspondingly.
 Time - can set your time and date format..
 Set Time/Date
 Auto update - You can choose the update method of time and date.
Update options:
 Update from Any (default)
 Update from DAB
 Update from FM
 No update
 Set 12/24 hour - You can change the time format on the display.
Time format options:
 Set 24 hour (default)
 Set 12 hour
9