Checking the charging Level
To check the battery charge level of the PT‐80, the battery monitor is shown on the Android Top
navigation bar.
Power LED Behavior on the Docking station
The Power LED will only shine when the Power adapter is plugged in.
Green — Fully charged
Blue — Charging
Using the PT-80
4.
No special skills are required to setup the PT‐80 device. Follow this User's Manual and the Quick Start
Manual.
Starting the Device
Start the device by pressing the power button on the top of the device.
Shutting Down the PT-80
The device should be shut down in the following way:
Use the menu in Android OS. Hold the power button for 3 seconds then select Power Off/Shutdown.
(recommended when possible).
Should you be unable to shut the device down using the above, you can hold the power
button on the top side of the device down for more than 10 seconds. The device will
consequently shut down immediately, without waiting for open applications to close.
Reset can be performed by holding the power button on the top side of the device for five (5) seconds.
Using the physical power button to turn off the device is not considered a "clean" shut
down, and is thus not recommended unless completely necessary because it can harm
your device.
Power Saving
The Power saving settings in the PT‐80 tablet are preset to optimize the battery run‐time.
Using the Cameras
The two built‐in cameras allow you to take snapshots or video of items facing the backside
of the PT‐80 device and from the display side.
8