Power Supply And Batteries - Paytel inteleTABLET PT-80 User Manual

Use only the docking station included with your Tablet PC. Using other docking stations may
damage the device.

Power Supply and Batteries

The PT‐80 device has one rechargeable battery. Android OS will give battery warnings at certain battery
levels. If the PT‐80 device is not charged or powered by the power supply, the PT‐80 device will shut
down automatically. For more information, more details about the specification, please see Appendix A‐
Technical Specifications
To charge the Battery Pack:
1. Connect the tablet to the docking station using docking connector.
2. Connect the docking station to an electrical outlet and charge the tablet until the battery is
fully charged.
3. After your device is fully charged, disconnect the charger from both the device and the
electrical outlet.
NOTE: To prevent damage to batteries, please see Section 8: Safety
You cannot overcharge the battery. It is fine to charge the battery overnight.
Battery life naturally degrades over time. Failure to follow instructions for recommended
operating temperatures, charge and discharge rates, and other instructions may accelerate
battery decay rates. If your tablet battery will not accept or hold a satisfactory charge, it may need
to be replaced.
For battery storage and charging temperatures, see Section 8: Safety
7