Trouble Shooting - Paytel inteleTABLET PT-80 User Manual

Use in direct sunlight or in any other hot environment may cause the PT‐80 device to develop hot
surfaces. There is a built‐in temperature sensor that monitors the device temperature. If the
sensor detects high internal temperature, the device will automatically trigger a Shut Down. It
may take a while before PT‐80 device can be restarted as the unit may first need time to cool
down.
2.3 Electricity
The device contains no user serviceable parts. Do not open the case of the PT‐80 Tablet Device.
Doing so will void the product warranty and may expose you to electrical hazards.
2.4 Software
Using an antivirus program is strongly recommended.
Software other than that which is pre‐installed on the PT‐80 is installed at the user's own risk.
External software could cause the PT‐80 to malfunction and might not be covered by the
warranty.
2.5 Magnetic Field
The PT‐80 device contains magnets. Magnetic fields may interfere with pacemakers,
defibrillators, or other medical devices. As a rule, maintain a minimum distance of 6 inches (15
centimeters) between any item with magnets and a heart device.
2.6 Third Party
Any use of the PT‐80 outside the intended use and together with any third‐party software or
hardware that changes the intended use voids the responsibility of the device manufacturer.

Trouble shooting

7.
In most cases, restarting your device will resolve any problem. To restart your device, hold the power
button for 5 seconds, then select Shut down/Restart. If your device has crashed (and displays nothing on
the screen), hold down the power button for 10 seconds to hard shutdown. Press the power button
again to turn the PT‐80 back on.
If this does not fix the problem, contact your supplier. Please have your serial number ready. This can be
found on the back of your device.
11