Sony PCG-XG500 Primary User Manual page 91

If your notebook is in power saving mode, switch to normal mode before connecting a
floppy disk drive to the Mini Docking Station.
With the VAIO logo facing up, plug the cable firmly into the connector and
1
both of the alignment posts in the guide holes.
2 With the VAIO logo facing up, plug the FDD into the other end until it locks
in place.
FDD Connecting
Floppy disk drive (supplied)
When you connect the floppy disk drive to the floppy disk drive connector of the Mini
Docking Station, you cannot use the PRINTER connector of the floppy disk drive
cable. The printer can be connected to the printer port on the Mini Docking Station.
Mini Docking Station
left side (supplied)
2
Floppy disk drive cable (supplied)
Using the Mini Docking Station
Alignment posts
1
91