Table of Contents
Advertisement
Fn+
(ESC)
System Suspend
Fn+
(F3)
Mute On/Off
Fn+
(F4)
Speaker volume
Fn+
(F5)
Brightness control
Fn+
/
(F7)
Switch to the
external display/LCD
Fn+
/
(F8)
Fn+
(F12)
System Hibernation
Puts the system into System Suspend mode, a power
management state. To return the system to the active
state, press any key or press the power switch on your
computer.
Toggles the built-in speaker off and on.
Adjusts the built-in speaker volume.
To increase volume, press Fn+F4, then
To decrease volume, press Fn+F4, then
Adjusts the brightness of the LCD.
To increase light intensity, press Fn+F5 and then
.
To decrease light intensity, press Fn+F5 and then
.
Toggles through the LCD, external display (connected
to the
Monitor connector) and both LCD and
external display.
Toggles through the external display connected to
an optional Mini Docking Station (PCGA-PSX1) and
the LCD.
Provides for the lowest level of power consumption.
When you execute this command, the state of the
system and state of the peripheral devices are written
to the hard disk and the system power is turned off. To
return the system to the originals state, use the power
button to turn on power.
or
.
or
.
or
or
Advertisement
Table of Contents
