Sony PCG-SR17 Primary User Manual page 82

VAIO® Notebook User Guide
Aligning the Palm Rest
8 Close the display panel and replace the six (6) screws on the bottom of the
notebook.
9 Use the Phillips (+) screwdriver to tighten all six screws at the locations
shown below.
1 Turn off the notebook and all peripheral devices. Disconnect the power cord
and all cables from the notebook, and then remove the battery.
2 Perform Steps 2 and 3 for "Installing a Memory Module." The notebook
interior becomes extremely hot during operation. Wait about one hour for the
notebook to cool down before you remove the screws.
84
Notch on keyboard