Setting Up Your Ethernet Connection - Sony PCG-SR17 Primary User Manual

Setting Up Your Ethernet Connection

1 Right-click My Network Places and select Properties.
2 Click the Identification tab and type in the computer name, workgroup, and
computer description.
1 Right-click My Network Places and select Properties. The Network and
Dial-up Connections dialog box displays.
2 Click Make a New Connection. The Network Connection Wizard displays.
Follow the online instructions to connect to the network.
1 Right-click My Network Places and select Properties.
2 Click the Configuration tab. This will give you access to a listing of installed
network components. If you do not see the component you desire, click Add
and follow the on-screen installation instructions.
1 Right-click My Network Places and select Properties. The Network and
Dial-up Connections dialog box displays.
2 Click the Add New Components hyperlink. This will give you access to add
or remove network components. Follow the on-screen installation
instructions.
Connecting to the Local Area Network (LAN)
73