Sony PCG-SR27K Primary Service Manual page 33

To Remove the Battery Pack
You can insert or remove the battery pack without turning off the notebook when
your notebook is connected to the AC adapter. Before inserting or removing a
battery pack, close the cover.
1 Turn off the notebook and close the cover.
2 Slide the lock lever to the
3 Slide the release lever to the
the notebook.
Removing Battery Pack
Lock Lever
✍
You may lose data if you remove the battery pack while the notebook is on and not
connected to the AC adapter or if you remove the battery while the notebook is in a
power saving mode.
Notes on Power
The AC Adapter
❑
Your notebook operates on 100-240V AC 50/60Hz.
❑
Do not share the AC outlet with other power-consuming equipment, such as
a copying machine or shredder.
❑
You can purchase a power strip with a surge protector. This device prevents
damage to your notebook caused by sudden power surges such as those that
may occur during an electrical storm.
❑
Do not place heavy objects on the AC adapter or its cord.
❑
To disconnect the cord, pull it out by the plug. Never pull the cord itself.
❑
Unplug your notebook from the wall outlet if you will not be using the
notebook for a long time.
❑
When the AC adapter is not used, unplug it from the AC outlet.
❑
Use only the AC adapter supplied. Do not use any other AC adapter.
position.
UNLOCK
position and slide the battery away from
UNLOCK
Connecting a Power Source
Battery Release Lever
17