Storage Recommendations; Intended Use - DeWalt DCST920 Instruction Manual

5. Foreign materials of a conductive nature such as, but
not limited to, grinding dust, metal chips, steel wool,
aluminum foil, or any buildup of metallic particles
should be kept away from charger cavities. Always
unplug the charger from the power supply when there
is no battery pack in the cavity. Unplug the charger
before attempting to clean.
6. Do not freeze or immerse the charger in water or any
other liquid.

Storage Recommendations

1. The best storage place is one that is cool and dry, away
from direct sunlight and excess heat or cold.
2. For long storage, it is recommended to store a fully
charged battery pack in a cool dry place out of the
charger for optimal results.
nOTE: Battery packs should not be stored completely
depleted of charge. The battery pack will need to be
recharged before use.
SAVE THESE INSTRUCTIONS FOR
FUTURE USE
COMPONENTS (FIG. A)

WARNING:
tool or any part of it. Damage or personal injury
could result.
Refer to Figure A at the beginning of this manual for a
complete list of components.

Intended Use

This string trimmers is designed for professional trimming
applications. This product is not an edger and is not
intended to be used for edging.
DO nOT use under wet conditions or in presence of
flammable liquids or gases.
This string trimmer is a professional appliance. DO nOT
let children come into contact with the tool. Supervision is
required when inexperienced operators use this tool.
ASSEMBLY (FIG. A, D, E)
Assembling the Pole
1. To assemble the pole, line up the upper trimmer pole
6 and the lower trimmer pole
Press down the latching button
pole into the lower pole. Ensure the latching button
engages the latch hole
16
2. Secure the poles by tightening the middle bolt
the supplied hex wrench
Fig. D
15
Never modify the power
7 as shown in Figure A.
15 and slide the upper
.
with
17
18 as shown in Figure E.
16
Fig. E
Attaching the Auxiliary Handle (Fig. A, F)
1. Slide the auxiliary handle
handle base 19 .
2. Hold the auxiliary handle in place and thread the
handle bolt 20 into the handle from the bottom of the
handle base.
3. Tighten the handle bolt with the supplied hex wrench
18 . Ensure the handle is securely attached.
4. Repeat for the other side of the auxiliary handle.
Fig. F
18
Adjustment (Fig. G)

WARNING:
of serious personal injury, turn appliance
off and remove battery before making any
adjustments or removing/installing attachments
or accessories.

WARNING:
Damage or personal injury could result.

WARNING:
APPLIANCE WITHOUT GUARD FIRMLY IN PLACE.
The guard must always be properly attached on the
appliance to protect the user.
The auxiliary handle 4 is positioned to maximize balance.
However, if adjustment is necessary, loosen the four bolts
21 with a hex wrench 18 and slide the auxiliary handle
up or down the upper trimmer pole
English
17
18
4 into the top hole of the
19
20
To reduce the risk
Never remove the guard.
NEVER OPERATE
4
.
6
7