Driveline/Axle
Propeller Shaft
•
The propeller shaft transmits drive force from the transfer case to the rear differential.
•
The propeller shaft is made of steel and is 60.5 mm in diameter. It comprises one
constant velocity (tripod double offset) joint and three cross-shaped joints.
Rear Axle Cross-Sectional View
•
The rear axle uses cartridge-type angular ball bearings, that allow the installation of drive
shafts for the rear wheels.
1
Angular ball bearing
03-10
Service Training Mazda6 MPS Supplement
M6-MPS_03001
M6-MPS_03002