Infinite Peripherals Imperea Quick Start Manual

QUICK START GUIDE

Imperea
For iPhone® 6s/7/8
Your Imperea includes a single-station charger with power adapter, case, and a battery
inside the unit.
Assemble Imperea with Your iPhone
1. Remove the Imperea from the box, and then carefully twist a penny or
the ply tool inside the bottom notch.
2. Twist the coin along the metal inside bottom notch to release the snap
fittings on the bottom of the cover.
3. After the cover is loose, pull the remaining snap fittings with the coin
along the top cover.
4. Place the unit on a flat surface, and then slide the iPhone downwards
towards the Lightning™ connector.
5. Once the iPhone is engaged with the Lightning connector, gently press
the iPhone onto the unit.
6. Ensure the iPhone is seated property and flush with the rubber seals.
7. Place the front cover onto the unit with the snaps fully engaged.
Disassemble Your iPhone from Imperea
1. Remove the Imperea from the box, and then insert a penny horizontally
into the bottom notch.
2. Press firmly and twist a penny along the metal inside the bottom notch to
release the snap fittings on the bottom of the cover.
3. Once the bottom part of the cover is loose, carefully pull on the remaining
snap fittings along the top cover.
4. With the top cover removed, take the Imperea and locate the camera
opening on the reverse side.
5. Through the camera opening, press gently on the iPhone to release it from
the rubber enclosure.
6. Once the top iPhone is released, slide the iPhone upwards, removing it
from the Lightning connector.
7. Gently snap the top cover into place for safekeeping.