Rear Panel - Yamaha M-5000 Owner's Manual

Note
For information regarding the connection procedure, refer
to "Connections" (page 11) .
A. SPEAKERS R CH output terminals
B. SPEAKERS L CH output terminals
Use the included speaker cables to connect speakers to
the terminals. For information regarding the connection
procedure, refer to "Connections" (page 11).
C. BAL input jacks
These are XLR-type balanced input jacks. Connect your
preamplifier here. Set the PHASE selector appropriately
for the connected preamplifier.
8

Rear panel

B
¹
D.
PHASE selector
Sets the position (polarity) of the HOT pin at the BAL
input jacks according to the connected preamplifier. For
more information, refer to "Balanced and unbalanced
connections" (page 10).
NORMAL: Pin #2 is specified as HOT.
INVERTED: Pin #3 is specified as HOT.
Refer to the instruction manual for the connected
component to find out the position of the HOT pin at the
balanced output jacks on the component.
E.
LINE input jacks
These are RCA-type unbalanced input jacks. Connect
your preamplifier here.
µ