Front Panel - Yamaha M-5000 Owner's Manual

A. STANDBY/ON/OFF (Power)
switch/indicator
Turns the power to the unit on or off.
STANDBY/ON: Turns the power to the unit on.
OFF: Turns the power to the unit off.
Power status
On mode
Standby mode
Off mode
The unit will enter standby mode in one of the following
events:
• If the unit is powered on but not operated for eight
hours while the auto power standby function is turned
on, or
• If you turn off the power to the device that is connected
to this unit's TRIGGER IN jack.
For more information, refer to " G AUTO POWER
STANDBY switch" in the "Rear panel" section
(page 9) and to "Trigger connections" (page 13).
6

Front panel

NATURAL SOUND
SPEAKERS
OFF
Indicator
Lit brightly
Lit dimly
Off
P O W E R AMPLIFIER
A
B
+
A B
BI WIRING
Note
After you turn on the unit, it will take a few seconds before
the unit can reproduce sound.
NOTICE
If you plan not to use the unit for an extended period of
time, be sure to unplug the power cord from the AC outlet.
Even when the STANDBY/ON/OFF (Power) switch is turned
off (the power indicator is dark), a minimal amount of
electric current is still flowing to the unit.
B.
SPEAKERS selector
Turns on or off two sets of speakers connected to the
SPEAKERS A and B terminals on the rear panel.
OFF: Both sets of speakers are off.
A: The set of speakers connected to the A terminal is on.
B: The set of speakers connected to the B terminal is on.
A+B/BI-WIRING: Both sets of speakers are on.