SCAN domestic SFO 4501 User Manual page 32

Table of Contents

Advertisement

Available languages

Available languages

Problem
Unsatisfied
Cloudiness of
washing
glassware
result
Black or grey
marks on dishes
Detergent left
in dispenser
Unsatisfied
The dishes are
drying result
not drying
Mulig årsag
Combination of soft water and too
much detergent
Aluminum utensils have rubbed
against dishes.
Dishes block detergent cups.
Improper loading
Too little rinse-aid dispenser.
Dishes are removed too soon.
Wrong programme selection
Using cutlery with a low-quality
coating
32
Løsningsforslag
Use less detergent if you have soft water and select a shortest
cycle to wash the glassware and to get them clean.
Use a mild abrasive cleaner to eliminate those marks.
Re-loading the dishes properly.
Load the dishwasher as suggested in the directions.
Increase the amount of rinse-aid/Refill the rinse-aid
Do not empty your dishwasher immediately after washing.
Open the door slightly so that the steam can escape. Begin
unloading the dishwasher only once the dishes are barely
warm to the touch. Empty the low basket first. This prevents
water form dropping off dishes in the upper basket.
In short programmes the washing temperature is lower. This
also lowers cleaning performance. Choose a programme with
a long washing time.
Water drainage is more difficult with these items.
Cutlery or dishes of this type are not suitable for washing in
the dishwasher.
Dispose of the dishwasher packaging material
correctly.
All packaging materials can be recycled.
Plastic parts are marked with the standard international abbre-
viations:
PE - for polyethylene, e.g. sheet wrapping material PS
for polystyrene, e.g. padding material
POM - polyoxymethylene, e.g. plastic clips
PP - polypropylene, e.g. Salt filler
ABS - Acrylonitrile Butadiene Styrene, e.g. Control Panel.
Packaging material could be dangerous for children!
For disposing of package and the appliance please go to a recy-
cling centre. Therefore cut off the power supply cable and make
the door closing device unusable.
Cardboard packaging is manufactured from recycled paper and
should be disposed in the waste paper collection for recycling.
By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment
and human health, which could otherwise be caused by inap-
propriate waste handling of this product.
For more detailed information about recycling of this product,
please contact your local city office and your household waste
disposal service.
DISPOSAL: Do not dispose this product as unsorted municipal
waste. Collection of such waste separately for special treatment
is necessary.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents