Sony VAIO VGN-CR100 Series User Manual page 119

8 Slide the memory module into the memory module slot and push it in until it clicks into place.
!
Do not touch any other components on the motherboard.
If you use only one memory module, be sure to insert it to the upper slot.
Be sure to insert the connector edge of the memory module into the slot while aligning the notch on the module with the small projection in the open
slot.
9 Replace the memory module compartment cover.
10 Tighten the screws on the bottom of the computer.
11 Reinstall the battery pack and turn on the computer.
n 119
Upgrading Your VAIO Computer
N