Mitsubishi NR-261 Manual page 124

Mitsubishi Multi Communication System
A REG station is received if an AF station cannot be received.
If a REG station can be received, "REG" is displayed on the
source plate.
1
NOTE
If there is no REG station, the broadcasting station stored
in the preset channel is received.
The station is not stored in the preset channel.
With REG stations, the contents of the broadcast may vary
according to the time slot.
1-124
Traffic Information Standby
This function is for automatically receiving stations that broad-
cast traffic information when the traffic information broadcast
starts.
NOTE
The traffic information standby must have been set to
[On] in advance. Refer to "Automatic Notification"
(p.1-312).
The traffic information standby does not function during
LW, MW or audio OFF.
When there is a traffic information interrupt while the Navi
Screen is being displayed
Traffic information is displayed on the source plate, and the
reception of traffic information is started.
E08111300014