Mitsubishi NR-261 Manual page 115

2. Insert a disk. Make sure the disk label is on top when
inserting into the slot. When the disk is taken automati-
cally, release your hand.
Mitsubishi Multi Communication System
Removing a disk
1. Press the [(Illustration)] key. The disk is ejected automati-
cally to the disk removal position. Remove the disk.
2. Press the [OPEN] key. Slide the monitor panel closed to
return the MMCS to its original state.
CAUTION
!
When inserting or removing disks, operate it while
parked in a safe location, and do not stop in no-
parking zones.
Do not insert hands, fingers, or other foreign objects
into the slot. This may cause injury, smoke, or fire.
Take care not to pinch your fingers, etc., when open-
ing or closing the monitor panel.
Make sure the monitor panel is closed while driving.
1
1-115