Mitsubishi NR-261 Manual page 117

5- PS name
Displayed while RDS data is being received. When a PS
name (Program Service Name) has not been obtained, the
frequency is displayed.
6- Stereo* 1
Displayed while a stereo broadcast is being received.
7- AF* 1
Displayed when the AF Check function is "On".
8- PTY* 1
The PTY (Program Type) of the RDS data being received is
displayed. "TRAFINF" is displayed while a traffic informa-
tion interrupt is being received, and "ALARM" is displayed
while an emergency broadcast interrupt is being received.
9- [
]
Touch this button to display the Sub Menu.
10- [PTY]* 1
Touch this button to display the PTY preset screen.
11- [Seek]
This function searches until it finds broadcasting stations
that can be received in the current location.
12- [Tune]
Touch this button to change the frequency by one step.
Touch and hold the button to change the frequency continu-
ously.
13- Preset CH
Touch this button to receive a stored frequency. Touch and
hold this button for preset storage.
NOTE
1
* : Only displayed or selected when FM is being received.
Mitsubishi Multi Communication System
Basic Operations
1. Press the [MODE] key.
2. Touch [FM], [MW] or [LW]. Radio is received.
NOTE
With FM, either [FM1], [FM2] or [FM3] can be selected
using the touch panel.
E08110700011
1
1-117