Table of Contents
Advertisement
Note: This smart switch complies with Part 15 of the FCC Rules. Operation is subject to the following 2
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
SAVE THESE INSTRUCTIONS
Product Requirements
In-wall installation with hardwired connections.
Neutral wire required
NOTE: The smart switch is not suitable for a single-wire switch box.
Way switch. The electrical box should be more than 2 inches deep.
NOTE: 3-Way Switching, where a light is controlled from two switch locations, is common in hallways, stairs,
and living rooms. In this configuration, you can turn the light on and off from either location.
A smartphone or tablet running iOS 8.0 or higher, or running Android 4.3 or higher.
A 2.4GHz WiFi connection (supports 802.11b/g/n standard).
The smart switch is compatible with incandescent, LED, halogen, and compact fluorescent light bulbs
Function Diagram
1. Power Button
2. WiFi Indicator
3. Power Indicator
Power Indicator
After installation, the switch is OFF and the power indicator is ON.
Press
to turn the switch on and off.
When the switch is ON, the indicator light is OFF.
WiFi Indicator Status
Indicator is off
Indicator solid white
Indicator blinks 1 time per second
Smart switch is not configured.
Indicator is turned off in VeSync app.
Smart switch is configured.
Smart switch is in Configuration Mode(see page 17)
4
Advertisement
Table of Contents
