Tape - Playback; Loading A Tape; Playing A Tape - Sony MHC-LX10000 Operating Instructions (MHC-LX10000) Operating Instructions Manual

Tape – Playback

Loading a tape

1
b
Push (Deck A) or
selected deck.
2
Load a tape into Deck A or B.
With the side
you want to
play back or
record facing
forward
3
Push the center of the tape lid to close
the deck.

Playing a tape

You can use TYPE I (normal) tape.
1
Load a tape.
2
Press TAPE A/B (or TAPE on the
remote) repeatedly until "TAPE A" or
"TAPE B" appears in the display.
3
Press DIRECTION repeatedly to select
"g" to play back one side, "j"
play back both sides or "RELAY"
(Relay Play) to play back both decks in
succession.
4
Press nN (or N on the remote).
The tape starts playing.
Press nN (or N on the remote) again to
play back the reverse side
US
16
B
(Deck B) on the
*1
to
*2
*3
.
*1
Only for the tape in Deck B.
Playback stops automatically after repeating
the sequence for five times.
*2
Relay Play follows this cyclic sequence up to
five times, then stops:
Deck A (front side) t Deck B (front side)
t Deck B (reverse side)
*3
You can only play back front side of the tape in
Deck A.
Other operations
To Do this
Press x.
Stop playback
Pause playback Press X. Press X again to resume
playback.
Turn m M clockwise or
Fast-forward or
counterclockwise (or press m or
rewind
M on the remote). To back to
normal playback, press nN
(or N on the remote).
Remove a tape Push
when playback is stopped.
Note
b
Do not push (Deck A) or
a tape, otherwise the tape could be damaged.
Tips
• When a tape is inserted, corresponding presence
indicator lights up in the display.
• If you press TAPE A/B (or TAPE on the remote)
while the system is turned off, the system turns on
automatically and "TAPE A" or "TAPE B" is
selected as the function.
• If you press nN (or N on the remote) during
"TAPE A" function and there is no tape in Deck A,
the system automatically switches to "TAPE B"
function when there is a tape in Deck B. Then,
playback will start and vice versa.
• You can also press FUNCTION on the remote
repeatedly to select "TAPE A" or "TAPE B".
Tape presence indicator
Front side Reverse side
indicator indicator
b B
(Deck A) or (Deck B)
B
(Deck B) while playing