Advertisement
What to expect
Important points to consider;
1
Preparation on the IVPC-DS;
2
Mounting;
3
Confirm operation;
4
1
Important points to consider
1. Activate the IVPC-DS and check the signal strength indicator using the IVPC-MS
or a device running the OPTEX Vision App. This will be your reference level.
2. The IVPC-DS can be unmounted and brought to the intended antenna install
location for Wi-Fi range checking before attaching the antenna. This is useful
for assessing your Wi-Fi environment.
2
Preparation on the IVPC-DS
1
Loosen the lock screw.
4
Power off.
Push the power on/off button.
Confirm LED is off.
6
Switch from INT to EXT of the
internal/external antenna switch.
EXT
read to avoid multiple installation attempts.
steps to take before mounting.
how to mount the IVPC-ANT.
make sure everything is working.
Remove the main unit.
2
2
Pull off the
main unit.
Slide the
main unit.
- If hardwired, please turn off
7
Attach the connecting cable.
Remove the back cover.
5
Caution
!
power to the device while
the terminals are exposed.
EXT
- 2 -
3
Remove the front cover.
Lift up.
1
2
Remove the
rubber bushing.
Insert a flat driver bit to pry open.
8
Replace the back cover.
Caution
!
- The back cover protects against
water intrusion. Make sure nothing
is interfering with it.
Advertisement
