Optex iVision+ Connect IVPC-ANT Settings And Setup Manual

Introduction
This guide covers the installation of the external antenna optional accessory for the IVPC-DS.
The external antenna comes with a 5 feet cable to allow for greater flexibility in antenna placement.
The guide will cover some key considerations for optimal placement of the antenna.

General Information

The IVPC-ANT helps by providing an antenna at a position that avoids obstacles against radio waves such as
walls and doors. The best communication is achieved by a direct open path between the communicating devices,
in this case the Wi-Fi router and the IVPC-DS. The antenna will not boost signal strength. If the Wi-Fi signal is too
weak at the IVPC-DS location, please consider getting a Wi-Fi range extender.
Parts identifications
Bracket and cable
l = 1.5 m (5 ft.)
SETTINGS and INSTALLATION GUIDE
External antenna
for Wi-Fi communication only.
(Sub 1 GHz IVPC-DI range will not be affected.)
Antenna Connecting cable
l = 0.2 m (7.9 inch)
IVPC-ANT
Refer to the Settings and Installation Guide for the IVPC-DS.
Do not use any external antenna other than the IVPC-ANT.
Do not extend the antenna and connecting cables.
(The cable and antenna are matched for optimal performance.)
< Accessories >
Screws & anchors
- 1 -
No.59-2736-2 1903-06
EN