Advanced - Samsung R410 Service Manual

- This Document can not be used without Samsung's authorization -
2. Introduction and Specification

Advanced

Core Multi-Processing
The option to determine whether to switch Single core or Dual Core processing.
Intel(R) SpeedStep(TM)
The option to enable or disable the SpeedStep function that automatically changes the CPU clock
speed according to CPU usage. Enabling this function extends the battery use time.
Touch Pad Mouse
The option to enable or disable the touch pad function. If the touch pad function is disabled using
this option, the disabled status will be retained at the next boot time. For your information, if the
touch pad function is disabled by pressing Fn+F9, the touch pad function is enabled at the next boot
time.
Legacy USB Support
The option to determine whether to support a Legacy USB device. If this option is set to Enabled,
you can boot from a USB device.
Large Disk Access Mode
Currently, [DOS] should be set in Torino2. Setting this option is rarely needed.
EDB (Execute Disable Bit)
If [enable], Intel Execute Enable Bit(function) will be enabled.
Internal LAN
The option to determine whether to use a cable LAN device of the system.
Purchased Date
Displays the date when a user boots the PC for the 10th time.
Main Advanced
Core Multi-Processing :
Intel® SpeedStep™
Touch Pad Mouse
Legacy USB Support
Large Disk Access Mode
Internal LAN
EDB (Execute Disable Bit)
Purchased Date
F1 Help
ESC Exit
Security
Select Item F5/F6
Select Menu Enter
2 - 21
Boot Exit
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[DOS]
[Enabled]
[Disabled]
2005/10
Change Values
Select ? Sub-Menu
Item Specific Help
Determines whether
the 2 nd core is
enabled.
nd
Disabled = 2 core is
disabled.
nd
Enabled = 2 core is
enabled.
F9 Setup Defaults
F10 Save and Exit