Using The Sleep Timer - Sony HT-SF1200 Operating Instructions Manual

Assignable inputs for digital
audio input
The initial setting is marked with an
underscore.
Digital audio Assignable
input inputs
[Display]
VIDEO 1 VIDEO 1
OPTICAL
VIDEO 2/BD
[VD1 OPT]
DVD
TV
SA-CD/CD
DVD VIDEO 1
COAXIAL
VIDEO 2/BD
[DVD COAX]
DVD
SAT
TV
SA-CD/CD
SAT OPTICAL VIDEO 2/BD
[SAT OPT]
DVD
SAT
TV
SA-CD/CD
Notes
• You cannot reassign several digital audio inputs to
the same input.
• You cannot use the digital audio input for the
original input when it is reassigned to another
input.
• When you reassign the digital audio input, you may
need to adjust the IN MODE setting in order to
output the sound from the receiver (page 52).
• You cannot reassign the digital audio input to
TUNER and DMPORT.
GB
56

Using the Sleep Timer

You can set the receiver to turn off
automatically at a specified time.
Display
Press SLEEP repeatedly while the
power is on.
VD1– VD1
Each time you press the button, the display
VD1– VD2
changes cyclically as follows:
VD1– DVD
VD1– TV
2-00-00 t
t OFF
VD1– CD
DVD– VD1
When sleep timer is activated, the display dims
DVD– VD2
and "SLEEP" indicator lights up.
DVD– DVD
Note
DVD– SAT
If you press any buttons on the remote or receiver
after the display dims, the display brightens up.
DVD– TV
After a while, the display dims again if no button is
DVD– CD
pressed.
SAT– VD2
Tip
SAT– DVD
To check the remaining time before the receiver
turns off, press SLEEP. The remaining time appears
SAT– SAT
on the display. If you press SLEEP again, the sleep
SAT– TV
timer will be canceled.
SAT– CD
1-30-00 t 1-00-00 t 0-30-00