Unpacking; Hookup Overview - Sony HT-K170 Operating Instructions Manual

Sony operating instructions home theater system ht-k170
Table of Contents

Advertisement

Available languages

Available languages

Getting Started
Getting Started

Unpacking

Check that you received the following items with your
amplifier:
• Remote commander (remote) (1)
• Size AA (R6) batteries (2)
• Scart adaptor (1)
• Speakers (5)
• Front speakers (2)
• Rear speakers (2)
• Center speaker (1)
• Subwoofer (1)
• Speaker connecting cord, 10 m (2)
• Speaker connecting cord, 2.5 m (3)
• Monaural connecting cord (1 phono to 1 phono) (1)
• Foot pads (20)
Inserting batteries into the remote
Insert two size AA (R6) batteries with the + and – on
the battery compartment. When using the remote,
point it at the remote sensor g on the amplifier.
When to replace batteries
Under normal use, the batteries should last for about 6
months. When the remote no longer operates the
amplifier, replace both batteries with new ones.
Notes
• Do not leave the remote in an extremely hot or humid
place.
• Do not use a new battery with an old one.
• Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
• If you don't use the remote for an extended period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
4
GB
]
}
}
]

Hookup Overview

The amplifier allows you to connect and control the
following video components. Follow the hookup
procedures for the components that you want to
connect to the amplifier on the pages specified. To
learn the locations and names of each jack, see "Rear
Panel Descriptions" on page 22.
Video Component
Hookups (5)
Speaker System
Hookups (6)
TV
Front
speaker
VCR
(L)
Center
Rear
speaker
speaker
(L)
Before you get started
• Turn off the power to all components before making
any connections.
• Do not connect the mains lead until all of the
connections are completed.
• Be sure to make connections firmly to avoid hum
and noise.
• When connecting an audio cable, be sure to match
the colour-coded pins to the appropriate jacks on the
components: White (left, audio) to White; and Red
(right, audio) to Red.
DVD
player/
Front
AC-3
speaker
decoder
(R)
Active
Rear
subwoofer
speaker
(R)

Advertisement

Table of Contents
loading

Table of Contents