Before You Use Your Amplifier - Sony HT-K170 Operating Instructions Manual

Getting Started

Before You Use Your Amplifier

Before you use your amplifier for the first time or when
you want to clear the amplifier's memory, do the
procedure below:
?/1 (power)
1
Turn off the amplifier.
2
Press ?/1 (power) for more than 4 seconds.
"INITIAL" appears in the display and the items
including the following are reset or cleared:
• All sound field parameters are reset to their
factory settings.
• The fan control setup is reset to FAN ON.
Note
If you are using a Sony DVD player together with this home
theater system, set your DVD player to the following
configuration:
Speakers
Front
Center
Rear
Subwoofer
If you are using a non Sony DVD player, refer to the
operating instructions supplied with the DVD player for
speaker setup.
10 GB
Settings
SMALL
SMALL
SMALL
YES