H3C S3100-52P Operation Manual page 21

Operation Manual – VLAN
H3C S3100-52P Ethernet Switch
II. Configuration procedure
Follow these steps to configure the protocol template for a VLAN:
Enter system view
Enter VLAN view
Configure the protocol
template for the VLAN
When configuring a protocol template for a protocol-based VLAN, use the at, ip or ipx
keyword to configure a standard template to match AppleTalk, IP, and IPX packets
respectively, and use the mode keyword to configure a user-defined template.
To do...
system-view
vlan vlan-id
protocol-vlan [ protocol-index ] { at
| ip | ipx { ethernetii | llc | raw |
snap } | mode { ethernetii etype
etype-id | llc dsap dsap-id ssap
ssap-id | snap etype etype-id } }
Use the command...
2-9
Chapter 2 VLAN Configuration
Remarks
—
—
Required
By default, no
protocol template
is configured for
the VLAN.