Operation; Signal Strength - Hama RC 550 Operating Instructions Manual

4. Getting Started
• Open the battery compartment (11), insert two AA batteries with the correct
polarity and close the battery compartment (11).
• If nothing is shown on the LCD display after new batteries have been inserted, press
the RESET button (8) with a pointed object to restart the device.

5. Operation

Note – Input
• Hold down the
5.1. Automatic date/time setting using the DCF radio signal
• Once you have inserted the batteries, the display is switched on, an acoustic signal
sounds and the alarm clock automatically starts searching for a DCF radio signal.
During the search, the radio icon
• When the radio signal is received, the date and time are automatically set.
Radio icon
Display ashing
4
button (5) or the
Display
button (6) to select the values faster..
will ash. This process can take 3 to 5 minutes.

Signal strength

Searching for the DCF signal
No reception
Poor
Fair
Excellent
Active