Operation - Hama RC 130 Operating Instructions Manual

5. Operation

Note – Input
Hold down the p button (2) or the q button (3) to select the values faster.
5.1. Automatic date/time setting using the DCF signal
• Once you have inserted the battery, the display is switched on, an acoustic signal sounds and the alarm
clock automatically starts searching for a DCF signal. During the search, the wireless symbol
This process can take 3 to 5 minutes.
• When the wireless signal is received, the date and time are automatically set.
Display
Display flashing
Display steady (not flashing)
Not displayed
Note
The clock automatically searches for the DCF signal once an hour to ensure that the time is correct. If the
search fails, it ends and is repeated at the next clock hour. The radio icon will go out
4
Searching for the DCF signal
Active
Successful – signal is being received
Error – signal search ended
Weak signal reception
will flash.