Tripp Lite DMCVW4555X4 Owner's Manual page 6

Assembly
4
Install the Support Plates
I
Slide the second set of support plates (I)
onto the column, making sure the arrows
on the support plates are pointing up.
F
Slide the first set of support
plates (I) onto the columns,
making sure the arrow on the
support plates are pointing up.
X + 0.2" (5 mm)
(X=Height of display)
Keep the
support plates
at the same
level.
6
Allow enough space
between the two
universal plates. Set a
distance of the height
of the display plus
0.2" (5 mm)
A-B
Once the support plate
positions have been
determined, use the 5 mm
hex key (A-B) to secure
them to the columns.