Table of Contents
Advertisement
Assembly
8
Attach the Displays onto the Universal Plates
• Using an assistant or mechanical lifting
equipment, carefully lift the display and
pull down the two adapter bracket straps at
the same time. Hook the display's adapter
brackets over the top of the universal wall
plate. Release the adapter bracket straps to
secure the display to the universal plate.
• Repeat procedure for the second, third and
fourth displays.
Use the combo locks (P)
to protect the displays
from tampering and theft.
1 mm
P
10
Note: When installing the displays, make
sure to work from the bottom universal
plate to the top universal plate.
Note: Make sure to
leave a 1 mm gap
between both displays.
Advertisement
Table of Contents
