Sony HT HT-SF2000 Operating Instructions Manual page 7

About the indicators on the display
1 2 3
SLEEP
L
C R
LFE
SW SL S SR
qf
Name Function
A LFE Lights up when the disc being
played back contains an LFE
(Low Frequency Effect) channel
and the LFE channel signal is
actually being reproduced.
Lights up when the sleep timer is
B SLEEP
activated (page 58).
The letters (L, C, R, etc.) indicate
C Playback
the channels being played back.
channel
The boxes around the letters vary
indicators
to show how the receiver
downmixes the source sound.
Front Left
L
Front Right
R
Center (monaural)
C
Surround Left
SL
Surround Right
SR
Surround (monaural or the
S
surround components obtained
by Pro Logic processing)
Example:
Recording format (Front/
Surround): 3/2.1
Sound Field: A.F.D. AUTO
D ; DIGITAL Lights up when receiver is
decoding Dolby Digital signals.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections.
Lights up when a playback
E HDMI
component is connected to this
receiver using a HDMI jack
(page 21).
4 5
DIGITAL HDMI
DTS PL
OPT COAX
qd qs qa q;
L
C R
SW SL SR
Name Function
F Preset Lights up when using the
receiver to tune in radio stations
station
you have preset. For details on
indicators
presetting radio stations, see
page 51.
Lights up when dynamic range
G D.RANGE
compression is activated (page
35).
H Tuner Lights up when using the
receiver to tune in radio stations
indicators
(page 49), etc.
Note
"RDS" lights up for models of
area code CEL, CEK only.
Lights up when a memory
I MEMORY
function, such as Preset Memory
(page 51), etc., is activated.
Lights up when IN MODE is set
J COAX
to "AUTO IN" and the source
signal is a digital signal being
input through the COAX IN
jack, or when IN MODE is set to
"COAX IN" (page 54).
K OPT Lights up when IN MODE is set
to "AUTO IN" and the source
signal is a digital signal being
input through the OPT IN jack,
or when IN MODE is set to
"OPT IN" (page 54).
L ;PL(II) "; PL" lights up when the
receiver applies Pro Logic
processing to 2 channel signals
in order to output the center and
surround channel signals.
"; PLII" lights up when the
Pro Logic II Movie/Music
decoder is activated.
6 7
D.RANGE
MEMORY RDS
ST MONO
9 8
continued
7 GB