Sony HT HT-SF2000 Operating Instructions Manual page 37

Menu Parameters
[Display] [Display]
A. CAL Auto calibration on/off
[8-A. CAL] [AUTO CAL]
(page 29)
Calibration load
[CAL LOAD]
a)
For details, refer to the page in the parentheses.
b)
The surround effect is not available for 2CH STEREO and A.F.D. mode.
c)
When you select this parameter, the "HDMI" indicator flashes in the display.
d)
When you set "CAL LOAD" in A. CAL menu to "LOAD YES", the setting is displayed as x.xx m
(xx'xx") and you can adjust the setting in 0.01 meter (1 inch) increment.
e)
After you have select the setting, press
f)
The default setting for models of area code U, UC is "ft." and for models of other area code is "m".
Settings
a)e)
A.CAL YES, A.CAL NO
a)d)
LOAD NO, LOAD YES
to confirm the selection.
Initial setting
A.CAL NO
LOAD YES
37 GB