Software Update - Fujitsu Arrows Hello AT01 Instruction Manual

Hide thumbs

Advertisement

Software update

When software update is executed, the software of AT01 can be
made the latest version.
※Please execute while connecting to Wi-Fi.
1.
From the top screen, tap
[Online Update]
2.
Tap [CHECK FOR UPDATES]
※If "Your software is the latest version" is displayed,
because software becomes latest, the operation after step
3 is unnecessary.
3.
Tap [To download]
4. After download completed, tap[Install]
※After update completed, the product will restart
automatically.
Restart and Initialize
Restart
You can restart this product.
1.
Slide the power key upward(more than 10 seconds)
Initialize
Return this product to its initial state.
1.
From the top screen, tap
[Restore Factory Settings]
2.
Tap[Restore Factory Settings]
Icons on status bar
In the status bar at the top of the display, the status icon
indicating the current state of this product will be displayed.
Main status icon
Battery level:
Charging
 How to use charging equipment, please check the instruction
manual of the charging equipment.
 When the product becomes extremely hot, stop using
immediately.
 When the battery level is too low, it will not be able to turn on
the power even during the charge. In that case, continue
charging for a while to recover.
How to Charging
When charging this product, please use a charging equipment
whose rated output is DC5V and less than 2A.
1.
Connect the USB Type-C cable of the accessory to the
charger
2.
Insert the plug of the USB Type-C cable horizontally into
the USB Type-C connection terminal
/Charging:
on the status bar → tap
on the status bar →
/Wi-Fi connected:

Advertisement

loading

Table of Contents