Usage Notes - Fujitsu Arrows Hello AT01 Instruction Manual

■ Material list
Main Unit
Display panel
Exterior case
Camera panel
Power key
Translation key
USB Type-C jack （Resin part）
USB Type-C cable
Cable coating
USB Type-A plug （Resin part）
USB Type-C plug （Resin part）

Usage notes

When using this product, also refer to "Safety Precautions" （→P.
５）.
Handling precautions
 This product is not waterproof. Do not use it around the water
such as bathroom, shower room, kitchen, washroom, etc.
 Do not apply any excessive force to the product. Please be
careful that unintended damage may happen in bags, etc.
Damage caused by excessive force will not be covered under
the warranty regardless of external damage.
 Do not use the product in extremely hot or cold, or in high
humidity places.（Use within an ambient temperature range of
5℃ to 35℃ and a humidity range of 45% to 85%）.
 Do not use the product in places under a lot of dust or
vibration.
Part
Front case
Back case
（Metal part）
（Metal part）
（Metal part）
Material/Surface
treatment
Glass／None
PC resin／Acrylic UV
cured coating
PC resin／Acrylic UV
cured coating
Glass／None
PC+ABS resin／Acrylic
UV cured coating
PC+ABS resin／Acrylic
UV cured coating
PA resin／None
Stainless steel／Nickel
plating
SEBS resin／None
PBT resin／None
Steel／Nickel plating
PA resin／None
Stainless steel／Nickel
plating