Sony DAV-HDX277WC Operating Instructions Manual page 71

** Depending on the country model, [720 × 576p] may
appear.
x [CONTROL FOR HDMI]
You can set the [CONTROL FOR HDMI]
function to on/off. This function is available
when you connect the system and TV with an
HDMI cable. For details, see "Using the Control
for HDMI Function for "BRAVIA" Sync"
(page 79).
[OFF]: Off.
[ON]: On. You can operate mutually between
components that are connected with an HDMI
cable.
Note
• When you set to [ON] without the HDMI connection
of the TV, [Please verify the HDMI connection.]
appears and you cannot set to [ON].
x [VOLUME LIMIT]
If you change the output method of the TV to the
system speaker on the TV menu or by pressing
THEATER, the System Audio Control
(page 81) is activated and loud sound may be
output depending on the volume level of the
system. You can prevent this by limiting the
maximum level of the volume.
[LEVEL3]: Maximum volume level is set to 10.
[LEVEL2]: Maximum volume level is set to 15.
[LEVEL1]: Maximum volume level is set to 20.
[OFF]: Off.
Note
• This function is available only when [CONTROL
FOR HDMI] is set to [ON].
x [YC C /RGB (HDMI)]
B R
You can select the type of HDMI signal output
from HDMI OUT jack.
[YC C ]: The system outputs YC
B R
[RGB]: The system outputs RGB signals.
Note
• If the playback picture becomes distorted, set
[YC C ] to [RGB].
B R
• If the HDMI OUT jack is connected to a component
with a DVI jack, [RGB] signals will be automatically
output even when you select [YC
x [AUDIO (HDMI)]
You can select the audio output status from the
HDMI OUT jack.
[OFF]: The system does not output the sound
from the HDMI OUT jack.
[ON]: The system outputs audio signals by
converting Dolby Digital, DTS, or 96 kHz/24 bit
PCM signals to 48 kHz/16 bit PCM.
• When you connect the unit and TV with an HDMI
• When you set the function to other than "DVD," the
x [JPEG RESOLUTION]
You can select the resolution of JPEG image
files output from the HDMI OUT jack.
[SD
resolution with a black frame.
[HD
with a black frame.
[HD]: The system outputs the HD resolution
without a black frame.
[(1920
full size HD resolution with a black frame.
[(1920
size HD resolution without a black frame.
• [JPEG RESOLUTION] is effective only when you
• You can select [(1920 × 1080i) HD
C signals.
B R
• If you select [(1920 × 1080i) HD
• HDMI signal will stop momentarily when:
C ].
B R
Note
cable and [ON] is selected, [AUDIO DRC], [A/V
SYNC], DYNAMIC BASS, "DEC. MODE," and
sound mode are not applied to the sound that is output
from the TV.
system does not output the sound from the HDMI
OUT jack even if you set [AUDIO (HDMI)] to [ON].
]: The system outputs standard
]: The system outputs HD resolution
1080i) HD
×
1080i) HD]: The system outputs full
×
Note
set [TV TYPE] in [VIDEO SETUP] to [16:9], and
you set [HDMI RESOLUTION] in [HDMI SETUP]
to other than [720 × 480p] or [720 × 576p].
1080i) HD] only when you set [HDMI
RESOLUTION] in [HDMI SETUP] to [1920 ×
1080i].
1080i) HD], the next image appears after the black
screen.
– The system is loading or unloading a DATA CD or
DATA DVD.
– You change the disc from a DATA CD or DATA
DVD.
]: The system outputs
] or [(1920 ×
] or [(1920 ×
71
US