Sony DAV-HDX277WC Operating Instructions Manual page 20

– Subject to vibrations
– Subject to direct sunlight
• Use caution when placing the speakers and/or speaker stands attached to the speakers on a specially treated (waxed,
oiled, polished, etc.) floor, as staining or discoloration may result.
• Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine.
• Do not lean or hang on the speaker, as the speaker may fall down.
Tip
• When you change the positions of the speakers, Sony recommends that you change the settings. For details, see
"Getting Optimal Surround Sound for a Room" (page 89) and "Calibrating the Appropriate Settings Automatically"
(page 90).
To install the speakers on a wall
Before installing the speakers on a wall, connect the speaker cord to the speaker.
Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with
the color tube to 3, and the speaker cord without the color tube to #.
1
Prepare screws (not supplied) that are suitable for the hole on the back of each speaker.
See the illustrations below.
3
30 mm (1 / inches)
16
2
Fasten the screws to the wall.
DAV-HDX277WC/DAV-HDX279W
For the center speaker
8 to 10 mm
11 13
( / to / inch)
32 32
20
US
Color tube
Front speaker (L): White
Front speaker (R): Red
Center speaker: Green
Surround speaker (L): Blue
Surround speaker (R): Gray
5
4 mm ( / inch)
32
145 mm
3
(5 / inches)
4
5 mm
7
( / inch)
32
10 mm
13
( / inch)
32
For the other speakers
8 to 10 mm
11 13
( / to / inch)
32 32
Hole on the back of
the speaker